Step 1: Measure the width of the opening, if measurement is not to the exact fraction of an inch, round down to nearest 1/16. This applies if measuring for replacement drawers as well”.

Step 2:

Measure depth of cabinet to the inside front edge, this measurement is not as crucial as the opening measurement, Cabinet Transformations will determine which slide to apply closest to your requirements. If measuring for replacement drawers, take measurement from out side front edge of cabinet to back of cabinet. Skip Steps 3 and 4 “See Figure B” Example – 24” Depth cabinet will accept 22” depth slides and shelf

Step 3:

Step 3 applies if you are installing our Adjustable Multi-Shelf System, Measure Ravel of cabinet “See Figure C”. If measurement is not to exact fraction of an inch, round up to nearest 1/32”. Also include height of opening. Most base cabinets are 21”-22” and pantries are 50”-54”. Please note this measurement in the comments area when checking out.

Step 4:

Considerations – Always check for clearance! “See Figures D and E” Make sure that when door is fully opened the shelf, when extended, will clear door. Also, check that door hinge does not protrude into opening. Most hinges “See Figure D” are all most flush mounted. If hinge is European Style hinge, or Spring Type hinge you will need to deduct ½” from opening width and add ½” to ravel measurement on hinge side in order to assure proper fit and clearance.

Note : If you have any questions concerning measuring your cabinets please contact customerservice@cabinetstransformations.com. We will be happy to assist you!